Share
Pin
Tweet
Send
Share
Send
Accessories made of leather and metal in the style of rock seem very time-consuming, and are made extremely simple.
A belt with loose bags focuses on the waist.
You will need:
Genuine nappa leather of medium thickness (Leder Hoffmann) approx. 160 cm wide 30 cm (you can take a skin plate shorter and wider, cut out the ties separately and stitch them); blocks with washers (Prym) - 1 package of blocks of inner diameter of 11 mm, 8 mm and 5 mm; (hole) piercing pincers and pincers for punching rivets (Prym); tailor's chalk.
Description of work:
The edge of the skin of a natural shape is the bottom edge of our belt: the length of the middle part of the belt is approx. 60 cm, and a height of 27 cm. On the seamy side of the skin, draw a straight upper edge of the belt with tailor's chalk, while the length of the whole-cut ties is approx. 30 cm and approx. 50 cm. Draw ties with a width of approx. 5 cm. Draw the front ends of the belt obliquely to the lower edge of the skin of a natural shape. Cut the belt, mow the ends of the ties. Break through blocks - see the photo of the model.
Pick up
The original lined leather clutch will be ready in two counts!
You will need:
smooth leather 1.5 sq. feet (1 sq. ft. = 30 x 30 cm), silver blocks (8 mm), punch-and-rivet pincers (all Prym), geometric triangle, white tint roller, 3.6 m leather strap, tailor's scissors.
STEP 1
On the underside of the skin, draw 12 squares (10 x 10 cm), cut them out and punch them in all corners through the hole.
STEP 2
Using rivet pliers, install blocks in the holes. For the front of the clutch, put 3 squares in 2 rows side by side.
STEP 3
Tie the squares together with pieces of leather strap. Also make the back of the clutch and connect the front to the back.INSTRUCTION
You will need:
Genuine nappa leather (Leder Hoffmann) 30 x 40 cm (approx. 1.5 sq. Ft.) Or skin flaps sufficient for 12 squares with a side of 10 cm; black lining approx. 40 x 50 cm; 48 blocks with washers (Prym) - 48 blocks with an inner diameter of 8 mm and 36 blocks with an inner diameter of 5 mm; 3.60 m leather strap with a thickness of 2 mm; (hole) punch mites; rivet punching pliers; magnetic clasp for a bag (Prym).
Description of work:
See step by step instructions above; at the same time big blocks break through. Cut the leather strap into 10 cm lengths. Fold both parts of the clutch with the wrong sides and tie the leather straps along the side and bottom edges.
At the top edges of the bag in the middle, attach parts of the magnetic closure.
From the black lining fabric, cut out a 32 x 44 cm rectangle. Fold the lining in half lengthwise to 22 cm wide with the wrong side inwards and grind side sections at a distance of 5 mm. Unscrew the lining and lay a stitch at a distance of 5 mm from each side seam. Thus, the seam allowances are masked. Unscrew the upper allowance of the lining on the wrong side, 2 cm wide, tuck into 1 cm wide and sew. Put the lining in the clutch. Along the upper edges of the leather squares, pierce 6 small blocks, grabbing a lining.
Photo: Jan Schmidel (6); catwalkpix.com (3); design: Alexandra Melakhrinos.
Share
Pin
Tweet
Send
Share
Send
